2010 Series -
High Frequency Fluorescent Lights for Machine
Vision
The Lighting System used by professional for industrial
grade applications. This industrial hardened lighting system will provide
years of service in harsh environments. If you are designing a machine
vision system for use in a factory environment don't settle for less than the
best!
- This family of illumination systems is
designed as a cost-effective solution for many machine vision applications.
The common configuration for this family is a single lamp, in a single
enclosure. The systems are designed around a high frequency precision
electronic ballast, which incorporates state-of-the-art control features.
-
The compact fluorescent
lamps utilized in the 2010 systems provide uniform light with an average
lifetime of >8000 hours continuous use. The lamp output will be
maintained to approximately ±1.0 % during the life of the lamp. Lamps are
pre-burned in a controlled environment within our facility to insure
consistent light output right out of the package. This service is also
provided for replacement bulbs. The 17S1 and 23S1 models offer a lamp dimmer
control as an option.
-
This precise control is
ideal for use in machine vision applications where constant luminous flux is
critical for the inspection. The high frequency power supply operates at
>40KHz so that sensors with electronic shutters capabilities can be used.
-
The system can be order
with a power entry module incorporating an internal fuse with standard style
power line cord or a permanently attached STO line cord.
-
Illumination systems
can be purchased with a variety of lamp temperatures (colors) to meet
specific project requirements; these include 4100, 3500 & 3100.
-
The units are designed
for 110 - 125VAC, single-phase operation and requires two (2) type GMA-2
fuses (5mm x 20mm), each 1.0 A maximum.
-
The industrial grade
aluminum extrusion housings provide "T-slots" on the back of the
enclosure for easy mounting in any orientation.
Shown above is the Standard 2010-17S1 system.
2010 Series (Internal Ballast Standard)Fluorescent lamp characteristics:
Part # Tube Lamp(s) Output Uniform Housing Overall
Length Wattage (Lumens) Length Width Length
13S1 12.8" tube 27 1620 8" Single 3.15" 17.0"
13S2 12.8" tube 52 3240 8" Double 6.30" 17.0"
17S1 16.5" tube 39 2510 15" Single 3.15" 20.5"
17S2 16.5" tube 78 5020 15" Double 6.30" 20.5"
23S1 22.5" tube 39 2700 20" Single 3.15" 26.5"
23S2 22.5" tube 78 5400 20" Double 6.30" 26.5"
23S1HO 21.5" tube 50 4100 28.5" Single 3.15" 26.5"
-QDC Quick Disconnect Cord Option Brad-Harrison 12' Cordset. 2015
Series (External Ballast Only!)33S1 33" tube 96 8100* 30" Single 3.15" 36.5"
33S2 33" tube 96 16000* 30" Double 6.30" 36.5"
33S2E 33" tube 96 16000* 60" Single 3.15" 75.5"
-QDC Quick Disconnect Cord Option Brad-Harrison 12' Cordset. Fluorescent lamp temperatures (colors):
Temperature Order Specification Code
5000 K Special Order /SPX50
4100 K (standard configuration) /841
3500 K must specify /835
3100 K must specify /831 * - estimated output
User must specify power cord type:
1) Yellow STO 16 gauge, 10 foot standard length, no
connector
2) Standard Line cord, 16 gauge 8 foot length, 3 prong
connector
| 
