2020 Series - High Frequency Fluorescent Lights with Feedback Control for Machine
Vision
The 2020-F8D2 (pictured) provides extremely uniform Lighting when two sources are
required. Power supply enclosure is NEMA12 rated when order without power entry module.
The ultimate in machine vision lighting systems for use in
illumination critical applications. The lighting system that monitors
itself and tell you when it is time to change the lamps. Available in a
wide selection of configurations using one to four lamps. These units have
lower operating cost over the life of a project compared to LED lighting
systems. All lighting systems loose light output over the course of their
lifetime, even LED's. Although LED lighting sources will remain
illuminated for a long period of time they continue to loose between 7 - 15% of
their output every year. If the vision application doesn't require
constant illumination there usually isn't a problem. However, if the
vision application requires constant luminous flux for hte inspection results to
remain constant then this is a very big problem. The cost of replacing
fluorescent lamps are a lot less expensive than replacing LED lamps!
The 2020 series illumination systems are designed for operation with up to four (4)
lamps, in single or dual lamp enclosure configurations. The system is designed around a
precision power supply that incorporates an active feedback loop that will consistently
maintain lamp output to approximately ±1.0% during the life of the lamps. Typical
bulb lamp life is approximately 12 months of continuous use, the actual life will very
depending on environmental conditions.
The precise control is ideal for use in machine vision
applications where constant luminous flux is critical for the inspection. The high
frequency power supply provides a 5 volt DC output that indicates that the illumination
system is operating correctly. The LED mounted on the exterior of the power supply
enclosure indicates that the unit is within regulation limits when illuminated.
The illumination systems can be purchased with a variety of
lamp temperatures (colors) to meet specific project requirements, these include: Cool
White (CW), Daylight (D), Warm White (WW), Blacklight (BL) and Blacklight Blue (BLB).
The units are designed for 110 - 125VAC, single phase
operation and requires two (2) type GMA-2 fuses (5mm x 20mm), 2.0 A maximum.
Key Benefits
- Ultra Consistent Luminous Flux (stable output) achieved with active loop feed back to
the power supply.
- "Threshold" sensitive machine
vision systems operate consistently!
- High frequency output (50kHz) for use with electronic shutter cameras up 1/10,000 second
- Patent Pending Modular Design allows various size lighting systems
- Available in "White" light or "Black"
light configurations
Lamp Selection
Ultra-Stable HF Fluorescent - Single Housing / Single
Lamp Units |
|
|
|
|
|
Lamp |
|
|
Uniform |
Lumens / |
Housing |
Housing |
|
Part Number |
Size |
Watts |
Lumens |
Length (1) |
Length (2) |
Length |
Width |
|
|
|
|
|
|
|
|
|
Fluorescent
Tube |
2020-F6S1 |
F6T5 |
6 |
235 |
4 |
59 |
15" |
1.6" |
Single
Housing |
2020-F8S1 |
F8T5 |
8 |
320 |
7 |
46 |
18" |
1.6" |
w/
Single Lamp |
2020-F13S1 |
F13T5 |
13 |
705 |
16 |
44 |
27" |
1.6" |
|
2020-F15S1 |
F15T8 |
15 |
940 |
10 |
94 |
23" |
3.15" |
|
2020-F15S1HO |
F15T8/HO |
30 |
1750 |
10 |
175 |
24" |
3.15" |
|
2020-F30S1 |
F30T8 |
30 |
1980 |
28 |
71 |
42" |
3.15" |
|
2020-F20S1 |
F20T12 |
20 |
1150 |
12 |
96 |
30" |
3.15" |
|
2020-F302S1 |
F30T12 |
30 |
2120 |
24 |
88 |
42" |
3.15" |
|
2020-F40S1 |
F40T12 |
40 |
2970 |
36 |
83 |
54" |
3.15" |
|
2020-F24HOS1 |
F24T12/HO |
32 |
1345 |
6 |
224 |
41" |
3.15" |
|
2020-F36HOS1 |
F36T12/HO |
44 |
2440 |
18 |
136 |
42" |
3.15" |
|
2020-F48HOS1 |
F48T12/HO |
60 |
3520 |
30 |
117 |
54" |
3.15" |
|
2020-F72HOS1 |
F72T12/HO |
85 |
5520 |
54 |
102 |
78" |
3.15" |
|
2020-F96HOS1 |
F96T12/HO |
110 |
8010 |
48 |
167 |
102" |
3.15" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ultra-Stable HF Fluorescent - Single Housing / Dual
Lamp Units |
|
|
|
|
|
|
|
Lamp |
|
|
Uniform |
Lumens / |
Housing |
Housing |
|
Part Number |
Size |
Watts |
Lumens |
Length (1) |
Length (2) |
Length |
Width |
|
|
|
|
|
|
|
|
|
Fluorescent
Tube |
2020-F6S2 |
F6T5 |
12 |
470 |
4 |
118 |
15" |
3.15" |
Single
Housing |
2020-F8S2 |
F8T5 |
16 |
640 |
7 |
91 |
18" |
3.15" |
w/
Dual Lamps |
2020-F13S2 |
F13T5 |
26 |
1410 |
16 |
88 |
27" |
3.15" |
|
2020-F15S2 |
F15T8 |
30 |
1880 |
10 |
188 |
23" |
4.73" |
*Special
3 lamp unit |
2020-F15HOS3 |
F15T8/HO |
90 |
5000 |
10 |
500 |
24" |
6.30" |
|
2020-F30T8S2 |
F30T8 |
60 |
3960 |
28 |
141 |
42" |
4.73" |
|
2020-F20S2 |
F20T12 |
40 |
2300 |
12 |
192 |
30" |
6.30" |
|
2020-F30S2 |
F30T12 |
60 |
4240 |
24 |
177 |
42" |
6.30" |
|
2020-F40S2 |
F40T12 |
80 |
5940 |
36 |
165 |
54" |
6.30" |
|
2020-F24HOS2 |
F24T12/HO |
64 |
2690 |
6 |
448 |
41" |
6.30" |
|
2020-F36HOS2 |
F36T12/HO |
88 |
4880 |
18 |
271 |
42" |
6.30" |
|
2020-F48HOS2 |
F48T12/HO |
120 |
7000 |
30 |
233 |
54" |
6.30" |
|
2020-F48VHOS2 |
F48T12/VHO |
230 |
8000 |
30 |
267 |
54" |
6.30" |
|
2020-F60VHOS2 |
F60T12/VHO |
270 |
12000 |
42 |
286 |
66" |
6.30" |
|
2020-F72VHOS2 |
F72T12/VHO |
330 |
13500 |
54 |
250 |
78" |
6.30" |
Ultra-Stable HF Fluorescent - Dual Housings / Single
Lamp Units |
|
|
|
|
|
Lamp |
|
|
Uniform |
Lumens / |
Housing |
Housing |
|
Part Number |
Size |
Watts |
Lumens |
Length (1) |
Length (2) |
Length |
Width |
|
|
|
|
|
|
|
|
|
Fluorescent
Tube |
2020-F6D1 |
F6T5 |
12 |
470 |
4 |
118 |
15" |
1.6" |
Dual
Housings |
2020-F8D1 |
F8T5 |
16 |
640 |
7 |
91 |
18" |
1.6" |
w/
Single Lamp |
2020-F13D1 |
F13T5 |
26 |
1410 |
16 |
88 |
27" |
1.6" |
|
2020-F15D1 |
F15T8 |
30 |
1880 |
10 |
188 |
23" |
3.15" |
|
2020-B23D1 |
Biax
23" |
78 |
5000 |
20
+ |
125
+ |
29" |
3.15" |
|
2020-F30T8D1 |
F30T8 |
60 |
3960 |
28 |
141 |
42" |
3.15" |
|
2020-F20D1 |
F20T12 |
40 |
2300 |
12 |
192 |
30" |
3.15" |
|
2020-F30D1 |
F30T12 |
60 |
4240 |
24 |
177 |
42" |
3.15" |
|
2020-F40D1 |
F40T12 |
80 |
5940 |
36 |
165 |
54" |
3.15" |
|
2020-F24HOD1 |
F24T12/HO |
64 |
2690 |
6 |
448 |
41" |
3.15" |
|
2020-F36HOD1 |
F36T12/HO |
88 |
4880 |
18 |
271 |
42" |
3.15" |
|
2020-F48HOD1 |
F48T12/HO |
120 |
7040 |
30 |
235 |
54" |
3.15" |
|
2020-F48VHOD1 |
F48T12/VHO |
230 |
8000 |
30 |
267 |
54" |
3.15" |
|
2020-F60VHOD1 |
F60T12/VHO |
270 |
12000 |
42 |
286 |
66" |
3.15" |
|
2020-F72VHOD1 |
F72T12/VHO |
330 |
13500 |
54 |
250 |
78" |
3.15" |
|
|
|
|
|
|
|
|
|
Ultra-Stable HF Fluorescent - Dual Housings / Dual
Lamps Units |
|
|
|
|
|
|
|
Lamp |
|
|
Uniform |
Lumens / |
Housing |
Housing |
|
Part Number |
Size |
Watts |
Lumens |
Length (1) |
Length (2) |
Length |
Width |
|
|
|
|
|
|
|
|
|
Fluorescent
Tube |
2020-F6D2 |
F6T5 |
24 |
940 |
4 |
235 |
15" |
3.15" |
Dual
Housings |
2020-F8D2* |
F8T5 |
32 |
1280 |
7 |
183 |
18" |
3.15" |
w/
Dual Lamps |
2020-F15D2 |
F15T8 |
60 |
3760 |
10 |
376 |
23" |
3.15" |
|
2020-F20D2 |
F20T12 |
80 |
4600 |
12 |
383 |
30" |
6.30" |
|
2020-F30D2 |
F30T12 |
120 |
8480 |
24 |
353 |
42" |
6.30" |
|
|
|
|
|
|
|
|
|
Ultra-Stable HF Fluorescent -
Quad Housings / Single Lamp / Unit |
|
|
|
|
|
|
|
Lamp |
|
|
Uniform |
Lumens / |
Housing |
Housing |
|
Part Number |
Size |
Watts |
Lumens |
Length (1) |
Length (2) |
Length |
Width |
|
|
|
|
|
|
|
|
|
Fluorescent
Tube |
2020-B23Q1 |
Biax
23" |
156 |
10,000 |
20"
+ |
125
+ |
29" |
3.15" |
+ - This rating is per Biax lamp.
* - This lamp configuration is pictured above.
Pictured above is the 2020-F24HOD1 series High Output fluorescent lighting system.
This system used F24T12 CW HO lamps and has UL and CSA power supply approval.
Power supply enclosure is NEMA12 rated with forced air cooling, other cooling
options are available.
|