The 4100 Series of backlights represent the latest in LED technology. The units are less than 8 mm thick and can fit in to tight locations that other units can not. The units are comprised of a large number of surface mount LEDS arranged in compact squares. The base size for these units are 30 mm on a side and may be purchased in units as large as 120 x 120 mm.
Standard 4100-M30/90 Red LED Backlight
These units provide very flat illumination fields that extent almost up to the edge of the units. The image below shows the uniformity of the LED backlight. The illumination is uniform up to approximately 3 mm of the edge. The purple color does not appear when viewing the LED backlight. The image below illustrates the uniformity using a special optical filter.
Standard 4100-M30/90 Red LED Backlight illumination field.
The LED family consist of LED rings, Domes, On-axis illuminators and backlight panels. All of the units provide excellent uniformity in the illumination pattern.
Shown above are the 70 mm diameter ring (39 mm opening),
the 30 x 90 mm backlight and the 60 x 90 mm backlight.
|4100-M30/30 (Color)||36||33||32||32||15||9||36||1.5||3||$ 198.00|
|4100-M30/60 (Color)||36||33||32||62||40||9||72||2.9||5.8||$ 313.00|
|4100-M30/90 (Color)||102||96||92||32||15||9||108||4.4||8.8||$ 395.00|
|4100-M30/120 (Color)||132||126||122||32||15||9||144||5.8||11.6||$ 489.00|
|4100-M60/60 (Color)||66||63||62||62||40||9||144||5.8||11.6||$ 489.00|
|4100-M60/90 (Color)||102||96||92||62||40||9||216||8.7||17.4||$ 689.00|
|4100-M60/120 (Color)*||74||115||122||62||76||9||288||11.6||23.2||$ 835.00|
|4100-M90/90 (Color)||102||96||92||92||70||9||324||13||26||$ 920.00|
|4100-M90/120 (Color)||132||126||122||92||70||9||432||17.3||34.6||$ 1,145.00|
|4100-M120/120 (Color)**||132||126||122||122||100||9||576||23.1||46.2||$ 1,418.00|
|* - Large Format Mounting Rotated, ** - Dual power cables required.|
|Note: Pricing and mounting position are subject to change without notice, please contact office for current information.|
|Note: Red LED are available in 12 VDC and 24 VDC configurations.|
|Note: White, Blue and Green LEDs require less than 50% duty cycle and must have proper heat sink, 24 VDC only.|
Note: Special lighting configurations are available upon
request. The design
must conform to LED panel size of 30 mm x 30 mm increments.
Housing: Metal 8.0 mm thick,
Lens adds 1 mm to overall thickness.
Design Current: .60 amps (small units)
Certification: CE marked
Life Rating: 80,000 hours with proper heat sink
Operating Temperature: -40 to +158 F
Standard cable configuration is flying leads, optional nano-change connector (3-Pin) is available.
All dimensions in figures A-F are in millimeters
Small Format 4100 Series LED Backlights
Large Format 4100 Series LED Backlights
(Mounting Hole locations may change depending on backlight size. Contact office for proper configuration)