29865 Six Mile Road  Livonia, Michigan  48152 USA
Industrial Machine Vision: +1 734 744 9275
Pharmaceutical Products: +1 734 744 9280
Toll Free in United States:+1 844 624 1260

Products and Solutions for Process Improvement

Machine Vision Components, Systems and Turnkey Inspection Solutions

Home Up Pharmaceutical MIB Products Industrial Components New Products Overview Profile Shipping Time

 Products
and
Solutions
for:

Home
Up

STC-CL152A

The STC-CL152A is a full featured, cost effective SXGA progressive scan digital CameraLink® cube camera with a Monochrome 1/2" CCD. Featuring a full frame 19fps SXGA output, partial scanning, triggering, and reset capabilities.

    

Specifications
 
Model STC-CL152A
Resolution SXGA (1.3 MegaPixel)
Image Sensor 1/2" Interline CCD (ICX205AL)
Signal Format Monochrome Progressive
Frame Rate 15, 19 fps
Total Picture Element 1434 (H) x 1050 (V)
Effective Picture Element 1392 (H) x 1040 (V)
Active Picture Element 1360 (H) x 1024 (V)
Chip Size (mm) 7.60 (H) x 6.20 (V)
Cell Size (um) 4.65 (H) x 4.65 (V)
Vertical Frequency 15.28 (15fps) / 19.3 (19fps) Hz
Horizontal Frequency 15.998 (15fps) / 20.57 (19fps) kHz
Horizontal Drive Frequency 28.6363 (15fps) / 36.8181 (19fps) MHz
Scanning Method Full Scan / Partial Scan (1/2, 1/4, Variable), Binning
Sync System Internal / External (HD/VD)
Communication RS232 via CameraLink® connector
Trigger Shutter Pulse Width Trigger (V Reset, Non Reset); Edge Preset Trigger (V Reset, Non Reset)
Shutter Speed OFF, 1/3 ~ 1/93,000 (15fps); 1/5 ~ 1/120,000 (19fps), (Variable, can be set at every H and clock)
Minimum Illumination 0.04 Lux @ F1.2, 20 IRE; 0.12 Lux @ F1.2, 50 IRE
Gain Adjustable Fixed Gain (0 ~ 27dB)
S/N Ratio @ 8bit output: <= 3 Digit (Gain 0 dB); @ 10bit output: <= 10 Digit (Gain 0 dB)
Gamma 1.0
Lens Mount C Mount
Video Output Digital 8 or10 bit CameraLink® (Base Configuration)
Optical Filter No IR cut filter
Optical Center Accuracy Position accuracy of H and V direction: +/- 0.31mm
Shock 70G (3 directions, 3 times each)
Vibration 10G (20 to 200Hz)
Power 12V DC +/- 10%
- Consumption < 2.5W, 208mA
Operating Temperature -5°C ~ 45°C (23°F ~ 113°F)
Storage Temperature -30°C ~ 65 °C (-22°F ~ 140°F)
Dimensions 28(W) x 28(H) x 29.5(D) mm (1.1” x 1.1” x 1.16”) (Not including lens mount and the connector)
Weight 43g (1.51 oz.)

Home ] Up ] Pharmaceutical ] MIB Products ] Industrial ] Components ] New Products ] Overview ] Profile ] Shipping Time ]

Copyright ©2000-2016 PHOENIX IMAGING
Last modified: May 25, 2016