|
Products
and
Solutions
for:
| |
Windows Based Machine Vision Systems
and Special Image Processing Systems
Phoenix Imaging offers three image processing systems designed for setup and
operation using Microsoft® Windows XP Pro, Windows
Vista Business or
Windows 7 Pro environments.
These are very capable machine vision systems designed for the most difficult
machine vision applications. A long list of functionality features and
ability to customize the vision system and the vision software to meet the
demands of the customer make this an attractive solution.
The PVS-80 is our lowest cost Windows based image processing system.
It provides capabilities from the standard 2 channel analog
RS-170 image acquisition
board to advanced digital camera boards. The system
provides 2 analog input sensor channels,
24 lines of digital I/O, 3.0 GHz
Intel Core2 Duo,
minimum 1 GB DDR2 memory,
500 GB hard drive, Windows
7 Pro and VisionMaker™ Development System for Epix
SV5 board. All
of this is packaged in a NEMA 12 industrial grade enclosure for $10,995.00 US.
The industrial computer is constructed using a passive backplane with 4 PCI
slots, 4 PCI-e slots and 2 computer slots (Single
Board Computer (SBC) requires 2 slot widths). The
SBC has 2 SATA2- ports, 1
floppy, 2 serial (RS-232), 4 USB (2.0) ports, 1 parallel port and
Dual GB Ethernet ports
onboard.
Several Base System configurations are available depending on our application
requirements.
PVS-100: Base System Level 1 - provides 1
digital input sensor channels
(CameraLink), 24 lines of digital I/O, 3.0 GHz
Intel Core2 Duo,
minimum 2 GB DDR2 memory,
500 GB hard drive, Windows
7 Pro and VisionMaker™ Development System for Epix
CL1 board. All
of this is packaged in a NEMA 12 industrial grade enclosure for $12,495.00 US.
The industrial computer is constructed using a passive backplane with 4 PCI
slots, 4 PCI-e slots and 2 computer slots (Single
Board Computer (SBC) requires 2 slot widths). The
SBC has 2 SATA2- ports, 1
floppy, 2 serial (RS-232), 4 USB (2.0) ports, 1 parallel port and
Dual GB Ethernet ports
onboard.
PVS-100: Base System Level 2 - provides
Dual
CameraLink digital
input for sensors,
24 lines of digital I/O, 3.0 GHz
Intel Core2 Duo, 4 GB DDR2 dual channel memory,
750 GB hard drive, Windows 7 Pro and VisionMaker™ Development System for Epix
CL2 board. The industrial computer is constructed using a passive backplane
with 4 PCI slots, 4 PCI-e slots and 2 computer slots (SBC requires
2 slot widths). The single board computer has 2 SATA2 ports, 1
floppy, 2 serial (RS-232), 4 High speed USB (2.0) ports,
1 parallel port and (2) fast 10/100/1000 MHz Ethernet
ports onboard. All units are packaged in a NEMA 12 industrial grade enclosure for
$13,695.00 US.
This package will support either USB, Gig-E or CameraLink sensors.
Option to Add a second Camera-Link Upgrade to PVS-100-D with
2 GB DDR Memory is $1,595.00 U.S.
The PVS-200-2 is our most versatile Windows based image processing
system. The PVS-200 provides parallel Windows based image processing systems.
It provides capabilities from performing multiple inspections from a single
vision system enclosure. Base systems provides a
connection to PCI-e (PCI-Express) image processing boards.
The PCI-e boards allow much faster data transfer for dual
port sensors such as the large format area cameras or large line scan sensors
(>6 K).
It provides capabilities from the standard dual channel
CameraLink inoputs, Gig-E, Firewire or USB 2.0 image
acquisition channels capable of supporting 2
simultaneous sensors. Base systems provide a
minimum 24 lines of digital I/O,
fast CPU's (3.2 GHz Intel
Core2 Quad Host processors with
a minimum of 4GB DDR2
dual channel memory, 1
TB hard drive
and VisionMaker™ Development System. All of this is packaged in a NEMA
12 industrial grade enclosure for less than $16,995.00 US.
The PVS-200-06 is designed to tackle the very
difficult applications that require a great deal of processing power.
Applications such as surface inspection and porosity inspection on machined
metal parts, high resolution dimensional measurement systems (3.2 - 16 MB sensor
images), True Position Measurements on machined components and high speed
particle detection and measurement systems.
Key Benefits
- Universal Operator Interface Design
- Windows Utilities and Add-in packages
- Visual Studio (Visual Basic & Visual C++) programming tools
Vision applications in which this technology is used
include:
Ceramics
Glass
Metal (machined or polished)
Babbitt
Plastics
Silicon Wafers
Various Road Materials
Machine Metal
Components
Expanded Metal
Formed Metal
Glass Containers
Die Cast Components
Plastic Injection Molded Components
True Position of Features on Compoents
Glass (Air lines & Bubble, Cracks, Chips, Stones)
Solutions (Contaminant)
Pricing
Basic systems start at less than $12K and high speed parallel processing
system are available for less than $25K. We offer a complete line of
systems that can meet just about every inspection requirement. Call
and ask for details on our product offerings.
1) - Windows NT is no
longer supported by Microsoft Corporation. Software installed on
systems order with the Windows NT environment will still receive full
warranty but will not receive future upgrades to VisionMaker™ Development
System Software.
|
