Products
and
Solutions
for:
| |
STC-SB500POE
GigE Vision PoE CCD, QSXGA, Mono, Cased
Available in Color or Monochrome
The STC-SB500POE is part of Sentech's Brand New Power over Ethernet
GigE Vision camera series. It features a 2/3" monochrome QSXGA sensor,
15fps and communication an Ethernet connector. The STC-SB500POE boasts
a compact 35(w) x 35(H) x 55.9 (D) mm size, a user-programmable Area
of Interest (AOI) and an uploadable Gamma Table. This camera meets all
industry standards for GigE Vision® and GenICam™, and is compatible
with all standard industry drivers. The GigE PoE series is available
now at an extremely low cost.
Specifications
Imaging
Model No
|
STC-SB500POE
|
Imager
|
2/3” Interline 5.0
Megapixel Monochrome Progressive CCD: ICX625AL
|
Chip Size
|
2536 (H) x 2068 (V)
|
Active Picture
Element
|
QSXGA: 2448 (H) x 2058
(V)
|
Cell Size
|
3.45 (H) x 3.45 (V) µm
|
Function
|
Scanning System
|
Progressive
|
Vertical Frequency
|
15.18586 Hz at full
resolution 0.48175 ~ 60.71422 Hz adjustable via the communication
(Frame rate depends on the AOI setting.) Maximum frame rate
(60.71422 Hz) is when vertical resolution AOI setting is 128.
|
Horizontal Frequency
|
31.1284 Hz
|
Pixel Frequency
|
81.8182 MHz
|
Noise Level
|
-
|
- @ 8 Bit Output
|
<= 4 Digit (Gain 0 dB)
|
- @ 10 Bit Output
|
<= 15 Digit (Gain 0 dB)
|
- @ 12 Bit Output
|
<= 60 Digit (Gain 0 dB)
|
Minimum Scene
Illumination
|
0.10 Lux @ F1.2, 15 Hz
|
Sync System
|
Internal
|
Video Output
|
Digital 8, 10 or 12 bit
Raw Data
|
Interface
|
PoE: IEEE802.3af CLASS2
(1000BASE-T)
|
Protocol
|
GigE Vision® 1.2 and
GenICam™ 2.0 Compliant
|
Exposure Time
|
Preset continuous mode:
10 useconds ~ 16,777,216 useconds; Preset trigger mode: 0, 10
useconds ~ 16,777,216 useconds; Pulse width mode: 10 mseconds ~
Unlimited, ‘0’:Electric Shutter Off(Full exposure)
|
ALC
|
AE and AGC (ON/OFF)
|
Gain
|
0 ~ 18.309 dB
|
Gamma
|
Gamma 1.0 (Factory
default) or downloadable gamma table
|
AOI (Area of
Interest) Function
|
Variable AOI setting
via the communication
|
Smear Reduction
|
Selectable ON/OFF via
the Communication
|
Color Interpolation
|
N/A
|
White Balance
|
N/A
|
Trigger Mode
|
Edge preset trigger,
pulse width trigger (unlimited exposure time)
|
Communication
|
UART Communication
through Ethernet port
|
I/Os
|
One opt-isolated input
and two open collector outputs
|
Mechanical
|
Power
|
-
|
- Input Voltage
|
+10.8 to +26.4 Vdc via
power-I/O connector or Power over Ethernet (Power-I/O connector is
prioritized.)
|
Consumption
|
12V: 4.1W / 3.5W, PoE:
4.5W / 3.8W
|
Dimensions
|
35 (W) x 35 (H) x 55.9
(D) mm excluding connectors
|
Optical Filter
|
No Filter
|
Optical Center
Accuracy
|
Positional Accuracy in
H and V directions: +/- 0.3 mm, Rotational accuracy of H and V: +/-
1.5 deg.
|
Material
|
Aluminum (AC)
|
Lens Mount
|
C Mount
|
Connections
|
RJ45 connector, Power-
I/O connector: HR10A-10R-6PB (Hirose) or equivalent
|
Camera Mount Screws
|
Two 1/4'' Tripod screw
holes (one each on top and bottom plate) Twelve M4 screws holes
(four each on top and bottom plate, two each on both side plate)
|
Weight
|
Approx. 130g
|
Environmental
|
Operating
Temperature
|
-
|
- Minimum
|
Environmental
Temperature: -5°C
|
- Maximum
|
Camera housing
temperature (top plate) shall not exceed 65°C (This corresponds to
an environmental temperature of approx. 40°C)
|
Storage Temperature
|
Environmental
Temperature: -30 to +65 ºC, Environmental Humidity: 0 to 85%
|
Vibration
|
20Hz ~ 200Hz ~ 20Hz
(5min./cycle), acceleration 10G, 3 directions 30 min. each
|
Shock
|
Acceleration 38G, half
amplitude 6 ms, 3 directions 3 times each
|
Standard Compliancy
|
EMS: EN61000-6-2, EMI:
EN55011
|
RoHS
|
RoHS Compliant |
|