The STC-CL500A/STC-CLC500A is a full featured, cost effective
QSXGA digital Power Over CameraLink cube camera. This camera delivers a full 5M Pixels resolution at 16 fps. It has a 2/3” CCD
with RGB Primary Color Filter for Color or a Monochrome version both of which feature partial scanning and triggering.
|
Specifications |
|
Model |
STC-CL500A |
|
Resolution |
QSXGA (5 MegaPixel) |
|
Image Sensor |
2/3" Interline CCD (ICX625AL) |
|
Signal Format |
Monochrome Progressive |
|
Frame Rate |
16fps |
|
Total Picture Element |
2456 (H) x 2058 (V) |
|
Effective Picture Element |
2456 (H) x 2058 (V) |
|
Active Picture Element |
2448 (H) x 2050 (V) |
|
Chip Size (mm) |
9.93 (H) x 8.7 (V) |
|
Cell Size (um) |
3.45 (H) x 3.45 (V) |
|
Vertical Frequency |
16.0Hz |
|
Horizontal Frequency |
31.2kHz |
|
Horizontal Drive Frequency |
64.0 MHz |
|
Scanning Method |
Full Scan / Partial Scan (1/2, 1/4, Variable), Binning w/ B/W |
|
Sync System |
Internal / External (HD/VD) |
|
Communication |
RS232 via CameraLink connector |
|
Trigger Shutter |
Pulse Width Trigger (V Reset, Non Reset), Edge Preset Trigger (V Reset,
Non Reset) |
|
Shutter Speed |
OFF, 1/8 to 1/209,000 sec. (Variable at every H and clock) |
|
Minimum Illumination |
0.24 Lux @ F1.2 |
|
Gain |
Adjustable Fixed Gain (0 ~ 16.3dB) |
|
S/N Ratio |
8bit output: =4 Digit (Gain 0dB); 10bit output: 15 Digit (Gain 0dB);
12bit output: = 60 Digit (Gain 0dB) |
|
Gamma |
1 |
|
Lens Mount |
C mount |
|
Video Output |
Digital 8, 10 or 12 bit CameraLink® (Base configuration) |
|
Optical Filter |
No IR cut filter |
|
Optical Center Accuracy |
Position accuracy of H and V direction: +/- 0.31mm, I2° |
|
Shock |
70G (3 directions, 3 times each) |
|
Vibration |
10G (20 to 200Hz) |
|
Power |
12V DC +/- 10% |
|
- Consumption |
< 4.0W, 333mA |
|
Operating Temperature |
-5°C ~ 40°C (23°F ~ 104°F) |
|
Storage Temperature |
-30°C ~ 65 °C (-22°F ~ 140°F) |
|
Dimensions |
35(W) x 35(H) x 40.7(D) mm (1.38” x 1.38” x 1.6”) (Not including lens
mount or the connector) |
|
Weight |
80g (2.82 oz) |
