19045 Farmington Road Livonia, Michigan 48152 USA
Main Phone: +1 248 476 4200

Machine Vision Systems and Turnkey Inspection Solutions

Products
and
Solutions
for:

LM Series: High Quality
Machine Vision Lenses

Phoenix Imaging offers a wide selection of machine vision lenses. These lenses are designed for the exacting requirements of machine vision applications. They are designed for flat field high resolution applications. The focal length range extends from 6 mm to 100 mm in a 2/3" format. Most of these lenses offer small diameters to fit in restricted areas. A few of the most popular lenses are illustrated on this web site and may be viewed by depressing the buttons to the left. If you need a lenses that is not illustrated please drop us a note and will attempt to locate the item for you.

The LM series are among the highest quality lenses machine vision lenses available. Theses are the more expense than general machine vision lenses. Phoenix Imaging stocks the entire family of LM lenses.

Stock Lenses:

6.0mm, F1.4, M/I, C-Mount Lens

8 mm, F1.4, M/I, C-Mount Lens, Locking Screws

12mm, F1.4, M/I, C-Mount Lens, Locking Screws

16 mm, F1.4, M/I, C-Mount Lens, Locking Screws

25 mm, F1.6, M/I, C-Mount Lens, Locking Screws

35 mm, F1.6, M/I, C-Mount Lens, Locking Screws

50 mm, F2.0, M/I, C-Mount Lens, Locking Screws

75 mm, F2.5, M/I, C-Mount Lens, Locking Screws

100 mm, F2.8, M/I, C-Mount Lens, Locking Screws

LM-16JCM (Mega Pixel Lense)

16 mm, F1.4, M/I, C-Mount Lens, Locking Screws

LM-25JCM (Mega Pixel Lense)

25 mm, F1.4, M/I, C-Mount Lens, Locking Screws

LM-50JCM (Mega Pixel Lense)

50 mm, F2.8, M/I, C-Mount Lens, Locking Screws

LM-50TC (Telecentric)

50 mm, F2.8, M/I, C-Mount Lens, Locking Screws

LM-Z613 (Manual Zoom) Discontinued Model

See Replacement Zoom Lens LMVZ-655

6.5 - 52.0 mm Zoom, F1.8, M/I, Manual Zoom,
C-Mount Lens, Locking Screws

[ Home ] [ Up ] [ Components ] [ Industrial ] [ Pharmaceutical ] [ New Products ] [ Profile ] [ Shipping Time ]

Copyright Š2000-2012 PHOENIX IMAGING
Last modified: April 14, 2012