Products
and
Solutions
for:
| |
STC-CLC202A
1/1.8”
UXGA Format Progressive CCD Camera Link Camera
The STC-CLC202A is a full featured, cost effective UXGA
progressive scan digital CameraLink® cube camera with 1/1.8" CCD with RGB
Primary Color Filter. Featuring a full frame 15fps UXGA output, partial
scanning, triggering, and reset capabilities.
Front View of CLC202A & Rear View of CLC202A Sensor
Model |
STC-CLC202A |
Resolution |
UXGA (2 MegaPixel) |
Image Sensor |
1/1.8" Interline CCD (ICX274AQ) |
Signal Format |
Color Progressive |
Frame Rate |
15fps |
Total Picture Element |
1688 (H) x 1248 (V) |
Effective Picture Element |
1628 (H) x 1236 (V) |
Active Picture Element |
1620 (H) x 1220 (V) |
Chip Size (mm) |
8.50 (H) x 6.80 (V) |
Cell Size (um) |
4.4 (H) x 4.4 (V) |
Vertical Frequency |
15.3164 Hz |
Horizontal Frequency |
19.176 kHz |
Horizontal Drive Frequency |
36.8181 MHz |
Scanning Method |
Full Scan / Partial Scan (1/2, 1/4, Variable) |
Sync System |
Internal / External (HD/VD) |
Communication |
RS232 via CameraLink® connector |
Trigger Shutter |
Pulse Width Trigger (V Reset, Non Reset); Edge Preset Trigger (V
Reset, Non Reset) |
Shutter Speed |
OFF, 1/4 ~ 1/120,000 (Variable, can be set at every H and clock) |
Minimum Illumination |
0.04 Lux @ F1.2, 20 IRE; 0.08 Lux @ F1.2, 50 IRE |
Gain |
Adjustable Fixed Gain (0 ~ 27dB) |
S/N Ratio |
@ 8bit output: <= 3 Digit (Gain 0 dB); @ 10bit output: <= 10 Digit
(Gain 0 dB) |
Gamma |
1.0 |
Lens Mount |
C mount |
Video Output |
Digital 8 or10 bit CameraLink® (Base Configuration) |
Optical Filter |
No IR cut filter |
Optical Center Accuracy |
Position accuracy of H and V direction: +/- 0.31mm |
Shock |
70G (3 directions, 3 times each) |
Vibration |
10G (20 to 200Hz) |
Power |
12V DC +/- 10% |
- Consumption |
< 3.0W, 250mA |
Operating Temperature |
-5°C ~ 45°C (23°F ~ 113°F) |
Storage Temperature |
-30°C ~ 65 °C (-22°F ~ 140°F) |
Dimensions |
28(W) x 28(H) x 29.5(D) mm (1.1” x 1.1” x 1.16”) (Not including lens
mount or the connector) |
Weight |
43g (1.51 oz.) |
|